Custom configurable control & communication system-on-chip with 1 ARM core and 7 xCore cores, for industrial components and consumer product applications. Choose from DC and PMSM motor & motion control Soft IP Blocks to design your SoC. Flexibly configure industrial Ethernet interfaces such as EtherCAT, ProfiNET or CAN and peripheral interfaces through RS-485, SPI, I²C or PWM.
Synapticon SOMANET SoCs integrate dedicated industrial communication, sensor data acquisition and motor control in a single device. They provide best-in-class performance and ultimate flexibility for your application. Select from a broad range of SOMANET Soft IP Blocks to configure your custom System-on-Chip. Being based on xCore and ARM processor architectures, the devices offer highly parallel, hard real-time processor cores that can be programmed in C, C++ and XC. Using SOMANET SoCs, a board design can be easily scaled by adding more instances of an application to a System-on-Chip. If more resources are required than a single device can offer, multiple devices can be connected through xConnect interface technology.
Typical applications for SOMANET CA1X:
AVAILABLE SOFT IP BLOCKS
Products that were realized with SOMANET CA1X:Fazua Evation drive system for e-bikes
|xCores||7 (32bit real-time RISC)|
|ARM Cores||1 (Cortex M3)|
|Distributed RAM||64 kB|
|Internal Flash||1 MB|
|Number of DIOs||110|
|Integrated Analog||ADC, DAC|
|Temperature Range||-40°C to 85°C|
|Größe||10 × 20 × 10 mm|